Yeni geliştirilen biyoseramik yapıdaki kök kanal patının dentin adezyonunda bazı irrigasyon maddelerinin etkisinin araştırılması
No Thumbnail Available
Files
Date
2010
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Sağlık Bilimleri Enstitüsü
Abstract
In this study, 66 maxillary central human teeth were selected for use. The teeth are mounted in acrylic resin up to enamel-cementum border. Then each tooth mounted on low-speed water-cooling microcut had been cut from enamel-cementum border primarly and 4 mm below this border consequently. Root canal spaces prepared using a tapered diamond bur, at low speed handpiece. Space for sealers placement was created with the following standardized dimensions; large diameter= 2,00 mm, smaller diameter=1,50 mm and lenght=4mm. The specimens were randomly divided into six group; Group 1: NaOCl/AH Plus Jet, Group 2: NaOCl/iRoot SP, Group 3: RC-Prep/AH Plus Jet, Group 4: RC-Prep/iRoot SP, Group 5: MTAD/AH Plus Jet, Group 6: MTAD/iRoot SP. After the root canals were filled with sealers all specimens were stored in a humidifier at 37 ºC for 72 h for complete sealers setting time. Each specimen was then subjected to a compressive load via an universal testing machine a cross head spead of 1 mm/min using 1 mm diameter stainless steel cylindirical pluger. The plunger tip was positioned so that it contacted the only filling material. Processing of the test continued until a sudden decline in the load/time on the computer program. Maximum failure load was recorded in Newtons and then converted into the megapascals. After the push-out test, all specimen were examined under steromicroscope at X50 magnification to. identify fracture models. Randomly selected three specimens of each group were examined in SEM.Push-out bond strength values showed statistically significant differences among the group (p<0,001).There was no statistically significant difference between the Group 1, Group 2, Group 3, Group 4 (P< 0,023; P< 0,143), Statistically significant difference was present between Group 5 and Group 6 (P< 0,001). In MTAD group AH Plus Jet sealer was showed a better bond strength than iRoot SP sealers (112,0±17,50; 17,4±9,00) and there was a significant difference (p<0,001). Intra group evaluation for AH Plus, showed that there was no statistically significant difference between Group 1 and Group 3 (167,5±40,25; 181,5±38,50), however, Group 5(112,0±17,50) showed lower bond strength. In iRoot SP group there was no statistically significant difference between, Group 2 and Group 4 (191,0±27,50; 187,5±54,75), however Group 6 which MTAD used (17,4±9,00) bond strength was decreased, and statistically significant difference (P<0,001). Steromicroscope examination of the specimens revealed that mixed failure seen in AH Plus group (% 66,66) and cohesive failure seen in iRoot SP group (%56,66).Key Words; Adhesion, AH Plus Jet, iRoot SP, irrigation, push-out test
Description
Keywords
kök kanal patı, Adezyonlar